Scroll Top
PulsaCoil Group - United Kingdom
Advance Appliance ETS 160

Supply &
Installation

Advance Appliance ETS 160

Advance Appliance ETS 160

Cylinder cost: £1,150.00
Labour & Materials: £1,101.09
Advance ETS 160
Total installation: £2,151.09 + VAT

Installation within
7 to 10 working days

Supply & Installation
£2,581.31 (INC. VAT)

🔧Installed in 7 to 10 working days

Supply
Only

Advance Appliance ETS 160

Advance Appliance ETS 160

Cylinder cost: £1,150.00
Pre-plumbed
Supply Only
Total: £1,150.00 +VAT

Delivered within
3 to 5 working days

Supply Only
£1,380.00 (INC. VAT)

🚚 Delivered in 3 to 5 working days

Select Required Unit

10-Year


Cylinder
Warranty

2-Years


Parts
Warranty

1-Year


Labour
Warranty*
Easy-fill
filling loop

*Labour Warranty Only Applicable on Installation Service

Advance Appliance ETS 160

A stainless steel thermal store in the shape of a cylinder with a separate cold section that, if desired, can be installed without a discharge overflow. Atmospheric pressure is present in the open-vent store. Relief valves, tun dishes, or metal discharge pipes are not necessary when using the main’s hot water because it is heated inside by a coil. One bath and one shower can be accommodated by the mains hot water delivery for an overnight (off-peak) fee.

Its hot water thermal store system gives you the advantage of mains pressure hot water and is ideal for contemporary apartments or all-electric homes. Installation is straightforward, maintenance is minimal, and the unit is small because it was created with today’s lifestyles in mind.

The Gledhill Pulsacoil can be perfectly replaced by the ETS 160, which does not require a printed circuit board, as it has a mechanical delivery system instead of an electronic one. It is made of stainless steel and requires little upkeep. If the isolation kit is installed, it can be installed without an overflow. If the cold section fills up, this option, which is available in the drop-down menu above, will turn off the incoming mains. The isolation kit cannot be purchased alone; it must be purchased along with the ETS 160. A valve is installed for the specific purpose of manually isolating the feed to the cold section.

The hot water store uses a bank of heated water with an effective internal heat exchanger connected to the incoming water mains for safe, quick “power” showering and bath filling. This system operates on the thermal store principle.

Two 3kw immersion heaters and a hot water control pack are installed in the unit.
For best effectiveness, the ETS 160 should be linked to a low-cost source and utilised at the proper times.

Recently, the thermal store was upgraded to provide insulation that is 60 mm thick, exceeding Part L of the Building Regulations.

The ETS offers a 10-year warranty. A two-year warranty is offered on the installed components. It has undergone independent testing and received an ERP Band “C”.

Advance ETS 160 – The Reliable PulsaCoil Replacement

£1,380 Supply Only (National) |
£2,581.31 Supplied & Fitted (SELECTED AREAS)

Replacing an ageing Pulsacoil? The Advance Appliance ETS 160 offers a durable, low-maintenance upgrade, delivering improved hot water flow, simplified servicing, and a 10-year cylinder warranty. It’s a perfect fit for flats, electric-only homes, and landlords looking to reduce repair costs.

💷 Pricing (Inc. VAT)

Option
Price
Supply Only (Nationwide) £1,380.00
Supplied & Fitted (Selected Areas) £2,581.31
✔ Supply-only available nationwide
⚠ Fitting service available in selected regions – check availability here
Buy it with

Advance ETS 160L Installation & Time clock

£2,755.31 INC VAT
Advance ETS 160Ltr
&
Timeclock

Advance ETS 160 Stainless With Scale Inhibitor

£2,701.31 INC VAT
Advance ETS 160Ltr
&  Scale Protection
Learn more here

Advance ETS 160 Stainless With Scale Inhibitor & Timeclock

£2,875.31 INC VAT
Advance ETS 160Ltr
& Scale Protection
& Timeclock

🔧 What Is the Advance ETS 160?

The Advance ETS 160 is an electric thermal store that works with Economy 7 tariffs and other off-peak electricity setups. It stores hot water for use at any time, delivering mains-pressure hot water without the need for a pressure-reducing valve or external expansion vessel.
It replaces older Pulsacoil units, such as the Pulsacoil 2000, A-Class, or BP, with fewer componentsreduced maintenance, and a significantly longer service life.

⚖️ Advance ETS vs PulsaCoil Stainless

Features
Advance ETS 160
PulsaCoil Stainless 180
Price (Supply Only) £1,380.00 £1,418.74
Price (Fitted) £2,581.31 £2,475.19
Cylinder Warranty ✅ 10 Years 5 Years (sliding scale)
Parts Warranty ✅ 2 Years 1 Year
Flow Rate ✅ 18–20 L/min 15 L/min
Hard Water Tolerance ✅ Moderate ❌ Prone to scale (PHE)
Components Mechanical – Blending Valve
Requires two electrical supplies
Electronic – Internal Pump / PHE / PCB & Electronics
Requires three electrical supplies
Maintenance Needs ✅ Very Low ❌ High

💡 Key Benefits of the Advance ETS 160

High-performance hot water – excellent for showers and fast bath filling
Fewer faults – no complicated electronics, pump or plate heat exchanger
Hard water compatible–performs better in scale-prone areas
10-year warranty – long-term peace of mind
Simple electrical setup – no third supply required for PCB board
Works with Economy 7 – save money with off-peak heating of hot water

📦 What’s Included

  • Advance ETS 160 thermal store unit
  • Easy fill – filling loop
  • Pre-plumbed & ready to install
  • Tempering Valve pre-installed
  • Dual-element ready (Economy 7 compatible)
  • Installation instructions (supply-only orders)

🛠️ Installation Available in Selected Areas

We offer a full supply and fit service in specific UK regions through our approved engineers.
Our fitting service includes:
  • Removal & disposal of your existing PulsaCoil

  • Full installation and commissioning

  • Electrical connections

  • System testing and warranty registration

📍 Availability depends on postcodeClick here to view installation locations.

🚚 Nationwide Supply-Only Delivery

We deliver the Advance Appliance ETS 160 across the UK with a tracked courier service. Each unit is securely packaged and ready for installation by a qualified engineer.

⭐ Customer Reviews

“Switched from a PulsaCoil A-Class to the Advance — no pump, no noise, better pressure. Delighted.”
– James T., Cambridge
“After years of repairs on my PulsaCoil 2000, the Advance ETS has been a game-changer.”
– Louise H., Reading

Excellent service – based on 908 reviews

PulsaCoil 5 Star Reviews

❓ Frequently Asked Questions

Q: Can I install the Advance Appliance ETS 160 myself?
A: Yes – if you are competent, you can install the Advance Appliance ETS.
Q: Does it work with Economy 7?
A: Yes – it’s specifically designed for off-peak tariffs and features dual immersion elements.
Q: Is it compatible with my old PulsaCoil setup?
A: In most cases, yes. It fits in standard airing cupboards and connects to existing plumbing with minimal adjustment.
Q: Can I get it fitted in my area?
A: We offer installation in selected regions. Contact us with your postcode to check availability.

Advance ETS 160Ltr Features & Benefits

  • 10-year cylinder guarantee.
  • Pre-plumbed hot water pack fitted.
  • Two immersion heaters fitted.
  • Safe fast delivery of mains hot water.
  • One bath plus one shower.
  • Water level indicator for installations without overflow.
  • Simple technology – no PC.
  • Stainless Steel construction with 10 Year Guarantee.
  • A neat all-in-one design reduces installation time and removes the need for unsightly additional pipe work.
  • Safe Vented Store
  • No Flues
  • Compact Design
  • Only three plumbing connections to make
  • Minimum maintenance
  • Attractive and compact
  • Safe open-vented store
  • ERP Class C

The unit has a 10-year cylinder warranty, 2-year parts and a 1-year labour warranty.

Learn More About Our Extended Parts & Labour Warranty

Advance Appliance ETS 160

Product Specification

Product Specification
Thermal Store
Advance Appliance ETS 160
Product Code 159674
MPN ETS 160
Type Direct Electric Thermal Store
Sub Type Direct
Colour White
Warranty (Years) 10
Height (mm) 1450
Diameter (mm) 575
Weight Empty (Kg) 45
Weight Full (Kg) 230
Capacity (Litres) 160
Mounting Vertical
Material Stainless Steel

Water Hardness and Scale Treatment

In areas where water hardness exceeds 200 parts per million (ppm), it is the responsibility of the homeowner to ensure appropriate treatment of the incoming cold mains water supply to prevent scale build-up. This may include the installation of a water softener or other suitable scale-inhibiting device. Failure to install adequate water treatment where required may result in the accumulation of limescale within the system, which can impair performance and efficiency. Please note that insufficient water treatment in hard water areas may invalidate the manufacturer’s warranty on the boiler and associated components.
You can check your water hardness here
You May Also Be Interested In

STAY CONNECTED TO LEARN MORE ABOUT OUR SERVICES
VISIT PULSACOIL GROUP’S SOCIAL MEDIA PAGES